Plans and parts projects for Model Aircraft by PassTime Hobbies.

Note: Many of the below noted projects were done by PassTime for other customers. Thus no portion of the project is distributed by PassTime. With an inquiery, reference to the customer or holder can be sent to you.

Cessna 170; Parts and plans for this once popular 72 inch span aircraft by Berkeley Models.

Cessna 172; Parts and plan for this once popular 54 inch span aircraft by Berkeley Models.

Dehaviland Beaver: Plan and parts for a 48 inch span aircraft for popular kit by Berkeley Models.

Cessna Birddog; Revised electric version R/C parts of popular 36 inch span kit by Berkeley Models.

Tri-Pacer: Revised electric version parts and plan for one piece 44 inch wing kit by Berkeley Models.

Berkeley Buccaneer; Parts for this 36 inch wingspan old timer

Berkeley Buccaneer Special, Parts and plan for this attractive 72 inch span old timer.

Berkeley Buccaneer Super, Parts and plans for this attractive 90 inch span old timer.

Berkeley Super Sinbad; Plan and parts for a popular 62 inch span glider.

Berkeley Helioplane; Plan and parts for a 40 inch span glow/electric S.T.O.L. airplane.

Berkeley Navion Super 260, Plans for Uncle-Willies on this attractive 68 inch span civilian aircraft.

Berkeley Chris-Craft 18, plan and parts for 18 inch long outboard boat

Berkeley Chris-Craft 22, plan and parts for 22 inch long Express boat

Dumas Chris-Craft sedan, plan and parts for 24 inch long boat

American Ace: Parts for a 36 inch span old timer by Berkeley.

Jimmie Allen Silver Streak; plan and parts for 1930's 32 inch span rubber powered airplane.

Jimmie Allen Silver Streak; plan and parts for a four channel electric powered version.

Jimmie Allen Yellow Jacket; plan and parts for 26 inch span rubber powered airplane of 1935

Jimmie Allen Yellow Jacket; plan and parts for 30 inch span radio/electric version.

Jimmie Allen Skyraider; plan and parts for this 26 inch span rubber powered airplane of 1936

Jimmie Allen B-A parasol; plan and parts for this 28 inch span rubber powered airplane of 1939

Jimmie Allen Blue Flash; plan and parts for this 24 inch span rubber powered airplane of 1933

Jimmie Allen Spartan Bomber; plan and parts for 32 inch span rubber powered airplane of 1939

Black Bullet; Parts for this rubber powered old timer.

Phantom Fury: New plan and parts for a popular rubber powered Comet model.

Lanzo Bomber; Parts and new plans for a 96 inch span old timer in 48 and 36 inch center section.

AND Parts and new plan for 490 S.I. version

AND new plan and parts for 790 S.I. version

AND Parts and new plans for 910 S.I. version

Lanzo RC-1, Parts and plan for a very early era model that eventially got adapted for radio control.

Megow's Quaker Flash; Parts and new plans for this 66 inch span old timer

Megow's Quaker; Parts and new plans for this 84 inch span old timer

Bunch Scorpion Major; Parts and new plans for this 58 inch span old timer

Comet Sailplane, new plans correcting errors in original and parts.

Cleveland Playboy Senior: Parts

Lancer 49: Plan and parts for this sleek looking Old-timer by Universal

Cleveland Eaglet; Ribs and other parts for a 2X size representation of a popular 1930's glider.

Cumulus; Ribs, fuselage and other parts for electric powered 67" span old-timer representation.

Retroplane; Ribs, fuselage and tailplane parts for electric powered 60" span old-timer representation

Hanriot; Ribs and wing parts for a 1/5 scale model of a WW1 scout plane.

Sterling Mini-Mambo; Ribs, fuselage and tailplans parts for a popular 1/2A powered trainer.

Sterling Piper Tri-pacer FS-1, parts for new 59 inch span wing on a well known kit.

Ultrasport-One Design; Plan and parts for 89 inch span, 3.2 powered aerobatic aircraft with foam wings

Ultrasport-One Design; Plan and parts for 89 inch span, 4.2 powered aerobatic aircraft with wood wings

Curare' by Prettner, new plan and parts on 64" W.S. International winner based upon M.A.N. article.

Atlas by Wolfgang Matt, parts for 64" W.S. International winner based upon M.A.N. 1976 article.

Pfalz; Ribs, fuselage and tailplane parts for a WW1 model with a 44 inch wing span.

Pocketeer; Ribs and tailplane parts for a 1940's era rubber powered of 40 inch wing span.

Saab J-21; 441 inch long plan and sections for 1/5.5 scale model rear engined model with 82" span.

Gollywock; Plans and parts for this popular rubber powered old timer by Midwest.

Senator; Parts for this popular rubber powered old timer by Keil Kraft.

Twin Lizzie; Parts for this 1/2A powered twin by Dickey.

Miss World's Fair; New plan and parts for this rubber powered aircraft once kitted by Scientific.

Machi 202; Parts for this Italian WW2 fighter from plan by I.M.P. models.

Tiger Moth, Parts for a WW2 biplane trainer by Dennis Bryant.

Hawker Tempest 5, ribs and parts for a ground attack airplane by Dennis Bryant.

Aeronca C-3, ribs and parts for an 82" WS slow fly classic by Dennis Bryant.

Comper-Swift, ribs and parts for this homebuilt by Dennis Bryant.

Hawker Fury, ribs and parts for a 70 inch W.S. biplane by Dennis Bryant.

SE5a; Ribs, fuselage, other parts and metal fittings for 1/6 and 1/4 scale WW1 biplane by Bryant.

Messerschmitt 163B Komet; parts for a rocket powered tail less fighter by Dennis Bryant of Elite.

Fokker D-8: Plan and parts for a 54 inch span O&R 23 powered old timer designed by Earl Stahl.

Stinson O-49: New plan and parts for a popular rubber powered Earl Stahl designed model.

Interstate Cadet: New plan and parts for a 29 inch wingspan rubber powered Earl Stahl model.

Waco model E: New plan & parts for a popular rubber powered Earl Stahl designed biplane model.

Taylorcraft Grasshopper: New plan & parts for a rubber powered Earl Stahl designed model.

Stinson L-5: New plan and parts for a popular rubber powered Henry Struck designed model.

Interceptor; Ribs, fuselage and tailplane parts for an English 42" span rubber powered model

Korda Class C; plan and parts for 1930's record setting 38" wingspan rubber powered model.

Korda Powerhouse, old timer wing parts.

Sky Rider; Plan and parts for a 1930's retracting gear cabane 34" span rubber powered model.

Thermic 72; Ribs, fuselage and tailplane parts for the 1930's era glider by Zaic.

Wakefield winner 1935: Redrawn plan and parts for contest winning model by William Ying.

Trenton Terror; Ribs for a 1940's model from a Popular Mechanics model.

North American Navion; parts and new plan for radio control model designed by Walt Musciano.

Mooney Mite: Parts and new plan for 45 inch span Jetco kit model.

Navigator; Plan and parts for enlarged design of Jetco amphibian with 57" span.

Sea Demon; Plans and developmental parts for a 53 inch wingspan new design amphibian.

Focke-Wulf Ta-152 Plans, design and developmental parts for a 95 inch wingspan, 1/5 scale high altitude WW2 interceptor.

Focke-Wulf 190-A; Ribs and tailplane parts for a fibreglass fuselage model aircraft.

Autogiro; Rotors and fuselage parts for a semi-scale design autogiro.

Ghostar; Fuselage parts for patterns on a ducted fan developmental design model aircraft.

Boeing F4B-4, Ribs, fuselage and tailplane parts for a biplane Navy fighter from R.C.M. plan.

Grumman F5F, Ribs, fuselage and tailplane parts for a twin engine WW2 interceptor.

Grumman F6F, Ribs and tailplane parts for a popular WW2 fighter with a fibreglass fuselage.

Grumman F7F, Parts and plans for a popular Korean War era fighter.

Grumman TBF, Ribs, tailplane, and new wing for WW2 fighter-bomber with a fibreglass fuselage.

Bristol M337; Ribs and parts for a WW1 biplane.

Albatros; Ribs and parts for a WW1 biplane.

Mosquito Mk.9, Ribs and parts for 82 inch span WW2 model with a fiberglass fuselage by Brian Taylor.

Mosquito Mk.5, Ribs, fuselage & tail parts for Brian Taylor, 80 inch span twin engine fighter.

Spitfire Mk.1b, Ribs, fuselage & tail parts for Brian Taylor, 69 inch span WW2 model fighter.

Spitfire Mk.14, Ribs, fuselage & tail parts for Brian Taylor, 70 inch span WW2 fighter.

North American AT-6 Harvard; All parts for Brian Taylor design 80 inch span trainer.

Gloster Gladiator, All parts for Brian Taylor design 65 inch span pre-WW2 fighter.

Vultee BT-19 Valiant; All parts for Brian Taylor 75 inch span WW2 trainer.

Cessna 120, All parts for a Brian Taylor 62 in wingspan civilian lightplane.

Lockheed C-130; Plan and parts for a four engine glow/electric modern cargoplane for Uncle-Willies.

Minimoa; All parts for four meter wingspan model of pre-WW2 model glider.

S.G. 38: Parts for ribs and tailplanes of a 1/12 scale model of a German glider.

Messershmidt 110: New plan for for an ill fitting but classic twin engine design of 81" wingspan.

Seahawk; Plywood parts for a fiberglass hull glow powered boat for Stan's Fibertech.

The Flyer, plywood parts on a classic 1930's tunnel hull boat for Riverside Boat Club.

The D-G, scribed plywood deck for the model hull once produced in fiberglass by Hartman.

Mister Darby; Plywood and plastic part files for this large electric tug boat for Harbor Models.

Pietenpol 4, Redraw plans and parts for a House of Balsa 42" span glow powered model.

Pietenpol 1/2A, Redraw plans and parts for a House of Balsa 40" span glow powered model.

No. Amer.. P-51D, Redraw plans and parts for a House of Balsa 45" span glow powered model.

Nomad, Redraw plans and parts for a House of Balsa 48" span glider model by Ted Strader.

F-W 190-A, Redraw plans and parts for a House of Balsa 36" span 1/2A glow powered model.

Republic P-47, Redraw plans and parts for a House of Balsa 36" span 1/2A glow powered model.

2 BY 4, Redraw plans and parts for a House of Balsa 48" span glider model.

2 BY 6, Redraw parts for a House of Balsa 60" span glider model.

V-1 Buzz Bomb parts, for Kress Jets.

SAAB Viggen, an electric ducted fan model, plan and parts for Kress Jets.

Heinkel 162, an electric ducted fan model, plan and parts for Kress Jets.

F-4 Phantom, an electric ducted fan model, plan and parts for Kress Jets.

F-15 Eagle, and electric ducted fan model, plan and parts for Kress Jets.

Beechcraft Twin: Parts for a first time electric powered model.

Grumman F-7F Tigercat, Redraw plans and parts for a Miller Models twin glow powered model.

Piper Tri-Pacer, plans for 1/4 scale 89 inch w/s model of a civilian aircraft for Miller Models.

North American P-51-D; Wing parts for a 1/4 scale model by Doss Steed using real airfoils.

LiveWire Trainer, parts for this classic era high wing model by DeBolt.

LiveWire Champ, parts for this 1955-1962 high wing model by DeBolt.

Perigee, parts and new plan for this 1962 aerobatic low wing model off original signed plan.

LiveWire Kitten, parts for this classic era high wing model by DMECO.

Interceptor Five, parts for this 1964 aerobatic low wing model by DeBolt.

Special, parts and Plan for this 1965 pylon racer model by DeBolt.

Stit's Playboy, parts and plan for this Internationally competitive, but never produced design of 1960 by DeBolt.

DMECO Viscount, parts and plan for this International competitive design by DeBolt in five versions.

DeBolt Twin Viscount, parts and plan for this .15 glow engine adaption of the Viscount.

Primer, parts and plan this classic high wing trainer model by G. Nelson.

Hustler, new plan and parts for this 1962 era delta wing pylon racer.

Propocat, new plan and parts for a winning 1966 class two aerobatic design by Bud Atkinson

Aristocat, new plan and parts for a winning 1964 class two aerobatic design by Bud Atkinson.

Half Wave, new plans and part for an old time radio control airplane.

Stark Shark, new plan and parts for a winning 1964 class two aerobatic design by Richard Allen

Butterfly parts for this 1963 era 1/2A plyon racer by Ecktronics.

Heinkel 219 Owl; Plans and parts of a 1/12 scale control line model of a WW2 twin engine night fighter.

The Fry, Plan and parts for a R/C hand launched glider by Steelhead Products.